Method 1: Use the QR code to add the device
1. Open the Google Home App

2. Click the + button in the upper left corner and select Set Up device

3. Click New device, select the home with the gateway, and click Next

4. Wait for the device to be searched, and select the Matter device. If the Matter device is found, click Next; if the Matter device is not found, click Set up a different device, and select Matter-enable device.

5. Scan the QR code of the device to be configured and agree to the usage agreement

6. Wait for the device to be added, the adding process takes about 30 seconds

If it cannot be added successfully, please check the following information:
a. Confirm that the device is in the factory state (the color of the light will cycle automatically after power-on, if not, please reset the device)
b. Confirm that the Google Home App (Android version) and the Hub/speaker version meet the minimum version requirements

c. Make sure your mobile phone and Hub/speaker using the Google Home App (Android version) are connected to the same 2.4GHz Wi-Fi

Method 2: Use an 11-digit Code to add devices
1. Open the Google Home App
2. Click the + button in the upper left corner and select Set Up device
3. Click New device, select the home with the gateway, and click Next
4. Wait for the device to be searched, and select the Matter device. If the Matter device is found, click Next; if the Matter device is not found, click Set up the different devices, and select Matter-enable device.
5. Enter the 11-digit Code of the device to be configured and agree to the usage agreement
6. Wait for the device to be added, the adding process takes about 30 seconds

If it cannot be added successfully, please check the following information:
a. Confirm that the device is in the factory state (the color of the light will cycle automatically after power-on, if not, please reset the device)
b. Confirm that the Google Home App (Android version) and the Hub/speaker version meet the minimum version requirements

c. Make sure your mobile phone and Hub/speaker using the Google Home App (Android version) are connected to the same 2.4GHz Wi-Fi